Portable power station 640wh-1280wh AC 110V~230V pure sine wave model ALP-710 series
- Pure sine wave output, ready to use upon plug-in.
- LiFePO4 battery, with a cycle lifespan of up to 2500 times.
- In-built BMS protection to ensure battery safety.
- Powerful charger for fast charging.
- Optional external battery pack to extend the running time.
- Transfer time is only 10ms, enabling seamless switch in case of power outages.
- Comprehensive protection against over-temperature, short circuits, and overloads.
- LED indicator for operational status.
- USB communication interface.
- Two power options available: 300VA and 1000VA.
- Wall-mountable slim body design.
- Significantly higher cost-performance ratio than similar products on the market. Welcome to inquire via email.
- This series of power sources offer pure sine wave output, high battery safety, extended runtime, seamless transition, and more. It is well suited for scenarios demanding high power quality and reliability, making it a highly recommended product range.
Visual Tour
Specification
| MODEL | ALP-712-640Wh | ALP-716-1280Wh | ||||
| Input | ||||||
| Input Sources | L+N+PE | |||||
| Rated Input Voltage | 220/230/240VAC | |||||
| Voltage Range | 185-264VAC | |||||
| Frequency | 50Hz/60Hz(Auto Adaptive) | |||||
| Battery | ||||||
| Battery Voltage | 12.8V | 25.6V | ||||
| Capacity | 50Ah 640Wh | 50Ah 1280Wh | ||||
| Charging Voltage | 14.4V | 28.8V | ||||
| High Voltage | 14.8V | 29.6V | ||||
| EOD | 10.6V | 21.2V | ||||
| PowerON Voltage | >11.2V | 22.4V | ||||
| CHARGERS | ||||||
| Voltage Range | 110~280VAC | |||||
| MAX Input Power | 240W | 500W | ||||
| MAX Charging Current | 20A | 20A | ||||
| Output | ||||||
| Rated Capacity | 300W | 1000W | ||||
| Output Voltage | 220/230/240VAC ±5% | |||||
| Output Frequency | 50Hz/60Hz ±0.5HZ | |||||
| Waveform | Pure Sine Wave | |||||
| Transfer Time (adjustable) | 10ms | |||||
| Peak Power | 500VA | 2000VA | ||||
| Output Outlets | Types optional x 2 | |||||
| Over Load Ability(Battery Mode) | 10min: 102%~110% | |||||
| 1min:110%~ 130% | ||||||
| Over Load Ability(Bypass Mode) | Hardware protection: 10A(fuse) | |||||
| Peak Efficiency (battery Mode) | 90% | 92% | ||||
| PROTECT | ||||||
| Over temperature protection, short circuit protection, overload protection | ||||||
| DISPLAY | ||||||
| LED Display | Display AC Mode / Battery Mode / Alarm&Fault | |||||
| COMMUNICATION | ||||||
| INTERFACE | USB-B, Baud Rate2400 | |||||
| ENVIRONMENTS | ||||||
| Operating Temperature | 20%~95% | |||||
| Humidity | 1000~4000M | |||||
| Storage Temperature | ≤45db | |||||
| Altitude | 0~40℃ | |||||
| Noises | -15~60℃ | |||||
| SPECIFICATIONS | ||||||
| Dimension(net), D * W* H (mm) | 250*345*310(mm) | 255*485*490(mm) | ||||
| Net Weighe(kg) | 9.2 | 20 | ||||
| Gross Weight(kg) | 10.2 | 22 | ||||
| Expandable battery packs | ||||||
| MODEL | ALP-640Wh-M | ALP-1280Wh-M | ||||
| Energy | 50Ah 640Wh | 50Ah 1280Wh | ||||
| Nominal Voltage | 12.8V | 25.6V | ||||
| CapacityBuilt-in Charger | N/A | 500W | ||||
| Net Weight | 8 | 14.8 | ||||
| Dimension, D* W* H (mm) | 250*345*310 | 255*485*490 | ||||
| Accessory | DC connect cable | |||||
| Compliance Safety | MSDS ,UN38.3 ,IEC62619 | |||||
